Downloading Files - Paxar 9402 Reference Manual

D o w n l o a d i n g F i l e s
To download from a PC:
1. Check that the PC and the printer are connected.
2. Check that communications have been established between
the PC and the printer.
3. Send the communication settings packet to select the
printer's communication settings. See "Defining the
Communication Settings Packet" in Chapter 2 for more
information (only used for serial communication). If you
change the printer's communication settings, make sure they
match those at the host before sending any packets to the
printer.
4. Type this command at the DOS prompt:
COPY LABEL1.FMT COM1
COPY LABEL1.BCH COM1
If you use the COPY command to download your formats, set flow
control to DTR (not XON/XOFF). Also, do not use the MS-DOS
prompt from inside Windows, because you will get a framing error.
Refer to the Operator's Handbook or keyboard's Operating
Instructions for offline data entry and more printing information.
Transmits a file called "LABEL1.FMT" to COM1.
Transmits a batch called "LABEL1.BCH" to COM1.
Printing 6-3