Paxar 9402 Reference Manual page 67

Or a valid downloaded font selector number.
Fonts 5 and 6 are for numeric data only.
The 9403 supports fonts 1, 2, 3, 4, 5, 6, 10, and 11.
The CG Triumvirate fonts support only the ANSI and DOS
Code Page 437 and 850 Symbol Sets. The scalable font does
not support Code Page 1256 (Arabic). See Appendix C for
more information.
T9. hgt mag Height magnifier, 1-7 times (4-255 for scalable/downloaded
TrueType fonts). Use a magnifier of 1 with proportionally
spaced fonts, because characters lose smoothness at higher
magnifications. See Appendix B, "Fonts," for more
information about fonts.
T10. wid mag Width magnifier, 1-7 times (4-255 for scalable/downloaded
TrueType fonts). Proportionally spaced fonts do not have a
set width. To estimate the size of your field, use the letter "W"
for the widest field or an "L" for an average width field. Find
your selected font and the desired width in Appendix B,
"Fonts."
NOTE: To use large point sizes (greater than 60 point), you
T11. color Options for standard printer fonts:
Options for the Scalable Font:
There are two types of field color overlay attributes:
Transparent
Opaque
must reconfigure memory and increase the size of
the scalable (vector) fonts buffer.
B Opaque, Normal, Black, Normal
D/R/W Opaque, Normal, White, Normal
O Transparent, Normal, Black, Normal
A/N Transparent, Normal, Black, Bold
B/O Transparent, Normal, Black, Normal
D/W Opaque, Normal, White, Normal
E/S Transparent, Italics, Black, Bold
F/T Transparent, Italics, Black, Normal
The overlay field (text or constant text) does
not block out (or "erase") existing fields.
The overlay field blocks out (or "erases")
existing fields.
Line field
blocked out by
opaque field
using attribute B
Line field not
blocked out by
transparent field
using attribute O
Defining Fields 3-5