Selecting The Needle In The User Interface; Selecting Needle Type And Needle Size; Attaching The Stitch Plate - Bernina 700 Manual

Embroidery preparation

Selecting the needle in the User Interface

After having changed the needle, it can be checked whether it can be used in combination with the selected
stitch plate.
> Touch the icon «Needle selection».
> Select the inserted needle.

Selecting needle type and needle size

Convenient memory function: To prevent a loss of information, the needle type and the needle size can be
saved additionally on the machine. The saved needle type and the saved needle size can be checked at any
time.
> Touch the icon «Needle selection».
> Touch the icon «Needle type/Needle size».
> Select the needle type (1) of the inserted needle.
> Select the needle size (2) of the inserted needle.

Attaching the stitch plate

The stitch plate has a small hole in the needle insertion area. The thread is pulled in and knotted optimally
which results in an optimized stitching result.
Prerequisite:
• The machine is switched off and disconnected from the power supply system.
• The foot and the needle are removed.
38
– If the selected needle is suitable in combination with the stitch plate, embroidering can be started.
– If the selected needle is not suitable in combination with the stitch plate, starting the machine is
automatically blocked.
1
0371485.0.04_2016-05_Manual_B700
2