Embroidery preparation
Attaching the multiple-spool holder
Additional information how to assemble the multi-spool pin can be found in the separate instruction manual
of the multi-spool pin.
2.5 Free arm
The BERNINA 700 provides a solidly designed free arm which offers a lot of space for large project on the
right of the needle.
2.6 Embroidery foot
Adjusting the presser foot position via the button «Presser foot up/down»
> Press the button «Presser foot up/down» to raise the presser foot.
> Press the button «Presser foot up/down» again to lower the presser foot.
Attaching the embroidery foot
> Raise the needle.
> Switch the machine off and disconnect it from the power supply system.
> Push the clamping lever up.
> Insert the embroidery foot from below into the bracket.
> Press the clamping lever down.
Selecting the embroidery foot in the User Interface
After having attached the respective embroidery foot (Embroidery foot No. 26, supplied accessory with the
embroidery module), you can select and save it on the machine. Moreover, alternative feet are displayed
which will also be suitable for the selected embroidery motif.
> Switch the machine on.
> Select the embroidery motif.
36
0371485.0.04_2016-05_Manual_B700