Message on the display
Cause
The contact between the
machine and the embroidery
module is interrupted due to
vibrations.
The needle position doesn't
correspond with the center of the
hoop.
The embroidery module is not
attached.
The hoop is not attached.
The hoop is attached.
The movement of the hoop
follows.
0371485.0.04_2016-05_Manual_B700
Repair
> Make sure that the module and the machine are
standing on a stable, even surface.
> Connect the embroidery modul to the machine.
> Calibrate the hoop.
> Connect the embroidery modul to the machine.
> Contact the specialized BERNINA dealer to have the
machine checked.
> Attach the hoop.
> Remove the hoop.
> Touch the icon «Confirm».
Attachment
99