Fixing The Touchscreen Pen; Switching On The Machine; Switching On The Sewing Light; Foot Control (Optional Accessory) - Bernina 700 Manual

Embroidery preparation

Fixing the touchscreen pen

> Store the touchscreen pen at the magnet holder.

Switching on the machine

> For switching on the machine, switch the main power switch to «I».

Switching on the sewing light

Prerequisite:
• The sewing light must be activated in the Setup Program.
> Push the button «Sewing light» to deactivate the sewing light.
> Push the button «Sewing light» again to activate the sewing light.
– Activating and deactivating the sewing light can also be carried in the Setup Program (see
page 58).

2.3 Foot control (Optional accessory)

Regulating the speed via the foot control

Via the foot control the speed can be adjusted steplessly.
> Press the foot control down carefully to start the machine.
> To embroider faster, press the foot control harder.
33
0371485.0.04_2016-05_Manual_B700