System Settings; Calling Up The Tutorial; Calling Up The Embroidery Consultant; Calling Up The Help - Bernina 700 Manual

4

System settings

4.1 Calling up the tutorial

The tutorial provides information and explanations on different sections concerning embroidering.
> Touch the icon «Tutorial».
> Select the desired topic to get information.

4.2 Calling up the embroidery consultant

The embroidery consultant provides information about decision support concerning embroidery projects.
After entering the fabric and the desired embroidery project, suggestions for the suitable needle and the
suitable presser foot are displayed.
> Touch the icon «Embroidery Consultant».
> Select the embroidery project.
> Select the fabric which is to be embroidered.
> Touch the icon Confirm.
– If the embroidery motif has already been selected, a warning appears that it will be overwritten.

4.3 Calling up the help

> Touch the window in the display where help is needed.
> Touch the icon «Help» to start the help mode.
> Touch the icon in the display where help is needed.
– Assistance concerning the selected icon is displayed.

4.4 Using eco mode

During a longer interruption of work the machine can be set into a power save mode. The power save mode
also serves as a child safety feature. Nothing can be selected in the display and the machine cannot be
started.
> Touch the icon «eco».
– The display goes to sleep. The power consumption is reduced and the sewing light is off.
> Touch the icon «eco» again.
– The machine is ready for use.
4.5 Cancelling any alterations with «clr»
Any alterations to motifs can be reset to basic setting. Exceptions are saved motifs which have been filed in
the personal memory and monitoring functions.
> Touch the icon «clr».
0371485.0.04_2016-05_Manual_B700
System settings
65