Installing In Windows 3.1 - Epson STYLUS PRO 5000 Setup Manual

Installing in Windows 3.1

Follow these steps to install the software in a Windows 3.1
system:
1. Make sure Windows 3.1 is running and the Program Manager
window is open.
2. Insert the EPSON printer software CD shipped with your
printer in the CD-ROM drive. (If you use the floppy disk
version, insert it in your floppy disk drive.)
3. From the File menu, choose Run. You see the Run dialog
box. In the Command Line box, type D:\SETUP (If your
CD-ROM drive has a drive letter other than "D" or you are
using the floppy version, substitute the appropriate letter.)
Note:
If you wish to make a floppy disk version of the essential printer
software (printer driver, utilities, and online help) on your
CD-ROM, type EPSETUP instead of SETUP. In the dialog box
that appears, click the Driver disk creation utility button and
follow the on-screen instructions.
2-22
Getting Started