Epson STYLUS PRO 5000 Setup Manual page 48

Note for Windows NT 4.0 users:
If your printer does not print correctly as a remote printer, the
following procedure may help you solve the problem.
1. Install the Windows NT 4.0 printer software in your
computer as described on page 2-11.
2. Click Start, point to select Settings, and click Printers.
3. Right-click the icon of your printer, and click Properties.
4. Select a printer port other than LPT1 in the Port menu.
5. From the DOS prompt, type net use [local port] :\\ [the
network path to your printer], and then press the Enter
key. For example C:\net use lpt2:\\ epserver\SP-5000.
6. Restart your computer.
Note:
If you need to cancel this setting, follow the instructions above and
type :/d instead of [the network path to your printer] in step 5. For
example, C:\net use lpt2:/d.
2-21
Getting Started
2