4. Click Start, and point to Run. If "Multiple-Language Version"
is not written on your Printer Software CD-ROM, type
D:\STM2\SETUP and click OK. If "Multiple-Language
Version" is written on the CD-ROM, type D:\ followed by
your preferred language: English, Francais, German,
Italian, Portugal, or Spanish. Then type \STM2\SETUP and
click OK. (If your CD-ROM drive uses a drive letter other
than "D", substitute the appropriate letter.)
5. Follow the instructions on the screen. Please note that EPSON
Status Monitor 2 will not start working until you restart
your computer.
Using your printer on a network with Windows 95
If you want to be able to send print jobs to your printer over a
network, you need to set up your printer as a network printer.
Follow these steps:
1. Double-click the My Computer icon.
2. Double-click the Printers folder.
3. Right-click the icon of your printer, and click Properties.
2-16
Getting Started