Epson STYLUS PRO 5000 Setup Manual page 54

2. After the initial screen appears, click Continue to advance
to the following dialog box, where you can choose to install
all or some of the software components included on your
printer software CD. For information on the included
software, see page 2-28.
3. If you want to install all of the printer software included on
your printer software CD-ROM, make sure the correct disk
is shown in the Destination Disk box and click Install.
Note:
If you do not want to install the entire printer software
package, select Custom Install from the pop-up menu and
click one of the driver packages and any other components
you need. Select Serial Driver Package if you connect the
printer directly to your Macintosh's serial port, or select
Network Driver Package and Epson Namer if you
connect the printer to your Macintosh over an AppleTalk
network.
Click the
4. When a message appears informing you that installation
is finished, click Restart to complete the installation and
restart your computer.
button to get information on the components.
2-27
Getting Started
2