Epson STYLUS PRO 5000 Setup Manual page 41

5. Make sure your printer model name is displayed on the
screen. Then click the Driver from disk provided by
hardware manufacturer button. Do not select any of the
other buttons.
6. Click OK. You see the Install From Disk screen.
7. See your printer software CD-ROM to determine which
version of the printer software you have, and insert the
CD-ROM (or floppy disk) in the appropriate drive.
Note:
There are two versions of the Printer Software CD-ROM, a
multiple-language version and an English only version. If
"Multiple-Language Version" is not written on the CD-ROM,
you have the English-only version.
8. For the English-only version CD-ROM, type D:\WIN95 and
click OK. For the multiple-language version CD-ROM, type
D:\ followed by your preferred language: English,
Francais, German, Italian, Portugal, or Spanish. Then
type \WIN95, and click OK. (If your CD-ROM drive uses a
drive letter other than "D", substitute the appropriate
letter.)
If you use the floppy disk version, type A:\WIN95 in the
Copy manufacturer's files from box and click OK. If your
floppy drive uses a drive letter other than "A", substitute
the appropriate letter.
9. At the next screen you can type a unique name for the printer
in the Printer name box. EPSON recommends that you
keep the model name as shown. The program will copy the
files to your hard disk and add an icon to the Printers
folder using the printer name you assign.
If you see a message asking whether you want to use this
printer as the default printer for Windows 95 applications,
select Yes. (No is the default setting.)
2-14
Getting Started