Using Interface Cards - Epson STYLUS PRO 5000 Setup Manual

Using Interface Cards

You can use various interface cards to supplement the
capabilities of your printer's built-in hardware interface. The
following EPSON interface cards are compatible with your
printer:
Interface card
32KB Serial Interface Card
LocalTalk™ Interface Card
Twinax Interface Card
Coax Interface Card
Type B Ethernet Interface Card
Type B Bidirectional
Parallel Interface Card
*The asterisk is a substitute for the last digit, which varies by country.
Note:
The use of some optional interfaces may increase the time required to
print graphics and image data.
If you are not sure whether you need an optional interface or if
you want to know more about interfaces, contact your dealer.
If you are planning to install the LocalTalk interface card in
your printer, you will need two LocalTalk Locking Connector
Kits (DIN-8 version). Attach one connector box to the
AppleTalk interface on the printer and the other box to the
printer port on the Macintosh. Then attach the LocalTalk cable
between the two connector boxes. See the owner's guide that
comes with the connector kits for more details.
Product number
C82307 /C82308
C82312
C82315
C82314
C82357
C82345
Installing Options and Memory Modules
4
4-7