Choosing A Place For The Printer - Epson STYLUS PRO 5000 Setup Manual

Choosing a Place for the Printer

Follow the guidelines listed below when placing your printer.
Place the printer on a flat, stable surface that is larger than
the printer. The printer will not operate properly if it is
tilted or at an angle.
Place the printer close enough to the computer for the
interface cable to reach it easily.
Leave adequate room for easy operation and maintenance.
Leave enough room on the table at the front of the printer
for the paper tray.
Avoid using or storing the printer in places subject to rapid
changes in temperature and humidity. Also keep it away
from direct sunlight, strong light, or heat sources.
Avoid places subject to shocks and vibrations.
Place the printer near a wall outlet where the plug can be
easily unplugged.
Note for French-speaking users:
Placez l'imprimante près d'une prise de contacte où la fiche peut être
débranchée facilement.
Avoid electrical outlets controlled by wall switches or
automatic timers. Also, avoid outlets on the same circuit as
large motors or other appliances that can cause fluctuations
in line voltage.
Keep the entire computer system away from potential
sources of electromagnetic interference, such as
loudspeakers or the base units of cordless telephones.
Use a grounded power outlet; do not use an adapter plug.
2-3
Getting Started
2