Table of Contents
Advertisement
In this example we assume an TFTP server resides on the host with the IP address 172.16.1.11 and the configu-
ration file named SN.cfg resides in the root directory of the TFTP server.
172.16.1.99(if-ip)[WAN]#copy tftp://172.16.1.11/SN.cfg startup-
config
Download...100%
172.16.1.99(if-ip)[WAN]#
After you reboot the SmartNode the new startup configuration will become active.
IMPORTANT
172.16.1.99(if-ip)[WAN]#reload
Running configuration has been changed.
Do you want to copy the 'running-config' to the 'startup-config'?
Press 'yes' to store, 'no' to drop changes : no
Press 'yes' to restart, 'no' to cancel : yes
The system is going down
For detailed information about configuring and operating guidance, set up procedures, and troubleshooting,
refer to the SN4950 User Manual available online at
SmartWare Software Configuration Guide available online at www.patton.com/smartnode.
SmartNode 4950 Series Quick Start Guide
When you issue the reload command, the SmartNode will ask if you want to copy the
running configuration to the startup configuration. Since you just downloaded a con-
figuration file to the startup configuration you must answer this question with NO.
Otherwise, the downloaded configuration will be overwritten and lost!
6.0 Additional Information
www.patton.com/manuals/SN4950.pdf
and the
7
Advertisement
Table of Contents
