Connections - Teufel System 9 THX Ultra 2 Technical Specifications And Operating Manual

Connections

Connect the System 9 THX
ard 5.1/6.1/7.1 AV receiver to set up a 5.1 surround
system with an active subwoofer. If your AV re-
ceiver is 6.1/7.1, simply ignore the Rear Centre
Out(s). To make full use of a 6.1 AV receiver, you will
need to install an additional M 950 FCR speaker. If
you have a modern 7.1 AV receiver, you can expand
your System 9 THX
set consisting of two additional M 950 FCR spea-
kers (see page 7) to create a full-blown 7.1 home
theatre surround system.
If you are using a 5.1 AV receiver, connect the
front, centre and rear speakers as shown in the
diagram. A 6.1/7.1 AV receiver additionally pro-
vides one or two Rear Centre Outs.
Connect the subwoofer output (Pre Out/Sub Out)
of your AV receiver to the right Line Input (R) of
the subwoofer using a mono cinch cable. In this
setup, the left input(Line Input L) is not connect-
ed. If you want to feed the Sub Out signal to both
of the subwoofer's inputs for an additional bass
boost, use a Y adapter(see Accessories, p. 7).
Connecting
the speakers
to an AV surround
receiver (example:
5.1 Cinema Set)
Note:
With the expanded 7.1 set,
connect the additional
L/R rear centre speakers
to the 7.1 AV receiver's
L/R Rear Centre Outs.
12 Teufel · System 9 THX
® Ultra 2
® Ultra 2 to any stand-
Ultra 2 with a "5.1 ≥ 7.1" EX
®
Front, centre and rear speakers
AV receiver
Speaker output
Subwoofer
Cinch line output Cinch line input
Sub Out
AV receiver
Teufel
connection panel
Input R
Subwoofer