Subscribe to Our Youtube Channel
Related Manuals for Teufel Impaq 3000 Mk 2 Blu-ray
Summary of Contents for Teufel Impaq 3000 Mk 2 Blu-ray
- Page 1 Technical Description and Operating Instructions Impaq® 3000 Mk 2 Blu-ray 5.1 Home Cinema System with Blu-ray Receiver...
-
Page 2: Table Of Contents
Contents LIPSYNC ......19 General notes and information ....3 SURROUND. -
Page 3: General Notes And Information
DivX® VOD sec- part of Lautsprecher Teufel GmbH. tion in your device setup menu. Go to www.divx.com for No part of these instructions may be reproduced in any more information on how to complete your registration. -
Page 4: Safety Notes
Safety notes Caution icons Danger Danger to children! You will fi nd the following caution icons in these instruc- Children can become trapped in the packing tions : fi lm when playing and suffocate. • Do not allow children to play with the unit or the pack- ing fi... - Page 5 • Only use suitable wall holders to mount the speakers. Proper use Verify the carrying capacity of the walls. Only use the unit as described in these operating instruc- • Only set up the device and the speakers on stable, tions.
-
Page 6: Overview
Overview Product contents 1 x 5.1 Blu-ray receiver IP 3000 BR Mk 2 4 x front/rear speakers IP 3000 FR 1 x center speaker IP 3000 C with table stand 1 x subwoofer IP 3000 SW 1 x remote control 2 x micro/AAA battery for the remote control 1 x AM antenna 1 x FM throw-out aerial... -
Page 7: Control Elements And Connections
Control elements and connections Front side 7 6 5 Item Name Description Item Name Description Save a radio station Playback/pause Selection of the source device Disk eject button USB connection Standby display – Earphone connection Infrared receiver Headphones Volume buttons Display panel –... - Page 8 Item Name Description Remote control Open the DVD tray Audio Source Select audio input Select radio “FM” or “AM” Radio Number buttons 1...0 Delete button Clear/Delete Skip back Skip forward Playback/pause Frame-by-frame button Mute the speakers Increase/decrease volume + Volume – Access popup menu of the BD Popup Menu Station memory/navigation up...
-
Page 9: Setup And Connection
Setup and connection Location tips Front speaker • The front speakers are set up to the right and left of the • Select a stable, level base or a suitable wall. screen or hung at a height of approx. 80 to 160 cm. •... -
Page 10: Mounting On The Speaker Stand M 50 P
Depress the connector terminal lever and run the cable Mounting on the speaker stand M 50 P end into the corresponding opening. • As the speaker is quite high, it must be mounted on the Releasing the lever locks the cable end in speaker stand so that the key hole opening is located place. -
Page 11: Network/Internet
Network/ Internet Inputs for source devices The receiver has two inputs for digital HDMI picture and Attention Disk of damage! audio sources (HDMI 1 + 2). An optical and coaxial digital audio input as well as three analogue audio inputs Improper use may lead to damage. -
Page 12: Remote Control
Remote control You will need two micro-type or AAA batteries with 1.5 Volt (included in the product contents) in order to operate the remote control. Inserting batteries 1. Push the clip of the battery compartment on the back side of the remote control towards the arrow and then remove the lid to the top. -
Page 13: Basic Functions
Basic functions Sensor buttons The buttons on the front side of the receiver are sensor buttons: Gently touching them is enough to trigger a switch operation. Activating and deactivating • You can switch your receiver to operational mode or standby mode with the button 15 or 69 “ ”. •... -
Page 14: Main Menu
Main menu You can set most receiver functions via the main menu. You can control the menu with the remote control. The menu is displayed on the connected television set. Important The menu functions are only available if “DISC” is selected as the source. Both devices must be activated, the image signal of the receiver must appear on the television set. -
Page 15: Settings
Settings “Film Mode” Movies on Blu-ray discs are saved at full resolution and You can defi ne all device settings here. 24 frames/second (1080p24). Not all television sets sup- 1. Push the button 68 “AV Source” and open the main menu port such frame rates. -
Page 16: Language" Menu
“ Language” menu “ System” menu You can defi ne the language for menus, subti- Here you can defi ne the general settings for tles and playback here. the receiver. “Optical disc autoplay” OSD – Language for the menu functions (German or English). -
Page 17: Network" Menu
Internet connection. • Primary DNS: Network address of the domain name server, which locates the corresponding IP address for domain names (e.g. www.teufel.de). Comparable with a phone book. • Secondary DNS: As above, it is used if the primary DNS fails. -
Page 18: Audio Settings
Audio settings You can access the audio settings by pushing the button 62 “Audio Setup”. The menus appear on the display panel. There is there- fore no need to activate the television set or the projector. LEVEL – Adjust the volume of the individual speakers. HDMI AUDIO OUT –... -
Page 19: Lipsync
LIPSYNC Digital image processing in the television set requires some time. In order to keep the image and sound synchronous, television sets delay the sound by a few milliseconds. For synchronous receiver sound, you can set the audio delay from 0 to 120 ms. •... -
Page 20: Special Function Buttons
Special function buttons “Resolution” button Tipping the button 55 “Resolution” adjusts the resolution of the television set for HD playback. Possible settings: HDMI Auto, 1080p, 1080i, 720p, 576p, 576i HDMI Auto will automatically select the highest possible resolution. Note: 1080p resolution is only available at the HDMI output. -
Page 21: Bd/Dvd/Cd Mode
BD/DVD/ CD mode Suitable BDs/DVDs/CDs • Only use commercially-available BDs/DVDs/CDs that have one of the adjacent symbols . • BDs/DVDs/CDs containing fi les in the following for- mats are readable: CD audio, VCD, SVCD, DVD video, BD video, MP3 and JPEG. •... -
Page 22: Playback Functions
Playback functions General playback information • Stop playback: Push the button 9 or 37 “ ”. • Continue playback: Push the button 9 or 37 “ ” again. • Play the next track: Tip the button 6 or 36 “ ”. - Page 23 Repeat section With this function you can mark a section for repetition. Note: This function is not available on some Blu-rays. 1. Start playback. 2. To start the desired section, briefl y push the button 53 “A–B”. 3. Briefl y push the button 53 “A–B” again at the end of the desired section.
-
Page 24: Usb Mode
USB mode Your new receiver can read USB memory sticks with the specifi cations USB 1.0 and 2.0 and a capacity of up to 8 gigabytes and play back music fi les in MP3 format or WMA and photos in JPEG or PNG format that are saved on it. -
Page 25: Selecting Fi Les
Selecting files The content of DVDs, CDs and USB sticks, on which media fi les are saved, is displayed on the screen in a browser. 1. Set the source “DISC” with the button 68 “AV Source”. 2. Open the main menu with the button 61 “Main Menu”. The left column shows the main menu items. -
Page 26: Radio Mode
Slideshow settings You can fi nd the menu item “Settings” in the left menu column of the sub-menu “Images”. Here you can change the slideshow settings. • Slideshow effects– different crossfades from image to image. • Slideshow delay – from 1 to 30 seconds per image. Start slideshow •... -
Page 27: Station Memory
the station is received in stereo, the note “STEREO” will also appear. Stations with a weak signal may cause faults in stereo mode. In this case, switch to mono mode by pushing the button 56 “Stereo/Mono”. If the station transmits an RDS signal, the name of the station is displayed shortly instead of the frequency. -
Page 28: Care And Cleaning
Care and cleaning Clean your receiver regularly with a soft, damp micro- How to clean your Blu-rays/DVDs/CDs fi ber cloth. When doing so, please be absolutely sure to To clean your CDs, only use cleaners observe the following instructions: certifi ed for CDs . Danger Risk of electric shock! If necessary, carefully wipe off the In contact with live parts, water can lead to... -
Page 29: Troubleshooting
Troubleshooting The following advice should help you to solve problems. If this doesn’t work, the extensive FAQs on our website will sure- ly provide you with support. Otherwise, please contact our hotline (see page 3). Take note of the warranty instructions. Problem Possible cause Solution... -
Page 30: Protecting The Environment
Problem Possible cause Solution No or distorted music The data storage device contains fi les in a Delete the incorrect fi les. playback. format other than MP3 or WMA. File damaged. Delete or skip fi le. Remote control doesn’t No line of sight between the remote con- Remove any obstacles. -
Page 31: Index
Index Activation 13 Language Screensaver 16 Antenna 10 Menu 16 Selecting a source 13 Audio Letterbox 14, 15 Selecting fi les 25 Delay 19 Selecting stations Menu 15 from the memory 27 Sensor buttons 13 MAC address 17 Setting the radio stations Media fi... -
Page 32: Technical Data
Technical changes reserved! For questions, suggestions or other issues please contact our customer service department: No liability is accepted for the Lautsprecher Teufel GmbH Tel.: 00800 200 300 40 (toll-free) Gewerbehof Buelowbogen - Aufgang D1 accuracy of this information. Tech- Fax: +49 (0)30 - 300 930 930 10783 Berlin (Germany), Buelowstr.
Need help?
Do you have a question about the Impaq 3000 Mk 2 Blu-ray and is the answer not in the manual?
Questions and answers