Connections In A 5.2 System - Teufel Theater 5 Hybrid Series Technical Specifications And Operating Manual

Connections in a 5.2 system

Connecting the integrated active subwoofers
For connection purposes, treat the M 520 F hybrid
boxes just like two separate active subwoofers. As
there are two subwoofers, you will need a Y adapter
(see page 7) to split your AV receiver's Sub Out into
two.
Connection panel
Sub left
Front left
Using two separate mono cinch cables, connect the
Y adapter's outputs to the M 520 F boxes. Each of
the hybrid boxes has an cinch "Line In" for this pur-
pose. On the connection panel, there is also an input
source switch. Set this to "AV Receiver" to ensure
the correct filtering and phasing of the subwoofer
signal.
Connecting the satellite speakers
Connect the Theater 5 Hybrid speakers to any
standard 5.1/6.1/7.1 AV receiver to set up a 5.2 sur-
round system. If your AV receiver is 6.1/7.1, simply
ignore the Rear Centre Out(s).
If you have a modern 7.1 AV receiver, you can expand
the Theater 5 system with an EX set consisting of
two additional M 520 R speakers(see page 7) to cre-
Connection panel
ate a full-blown 7.2 home theatre surround system.
Sub right
If you are using a 5.1 AV receiver, connect the front,
centre and rear speakers as shown in the diagram.
A 6.1/7.1 AV receiver additionally provides one or two
Rear Centre Outs.
Front right
Note:
With the expanded 7.2 speaker
set, connect the additional
L/R rear centre speakers to the
7.1 AV receiver's
L/R Rear Centre Outs.
Connecting the speakers
to an AV surround
receiver (example:
5.2 cinema system)
Teufel · Theater 5 Hybrid
11