Accessories(Optional) - Teufel System 9 THX Ultra 2 Technical Specifications And Operating Manual

5.1 cinema set
Table of Contents

Advertisement

Accessories (optional)
Optional accessories for the
System 9 THX
Ultra 2
®
As our customers' setup requirements tend to
vary considerably, the system does not ship with
any audio cables, wall mounts or speaker stands.
However, you can order suitable cables for the
speakers and subwoofers directly from us, as well
as any required mounts or stands.
Teufel offers the following accessories for your
System 9 THX
Ultra 2:
®
System 9 THX
Ultra 2, Direct EX Set
®
With the "5.1 ≥ 7.1" set, you
can expand your 5.1 System
9 THX
®
set into a 7.1 system and
take full advantage of a
7.1 AV receiver. The EX set
consists of two additional M 950 FCR speakers,
to be mounted centrally between the side rear
speakers(see page 11).
System 9 THX
Ultra 2, Dipole EX Set
®
If you wish to expand your
System 9 THX
round configuration from
5.1 to 7.1, you may also want
to consider adding two
M 950 D dipole speakers
for the rear centre channels. The Dipole EX Set
is particularly suitable if your system is already
using dipole speakers for the rear side channels,
and the distance between the listening spot and
the rear centre speakers is less than one metre.
Teufel speaker cable 2 x 2.5 mm
Highly flexible copper core
(650 strands) with a trans-
parent sleeve and polarity
markings. The 2 x 2.5 mm
cable can be used for cable
distances up to 15 metres. For longer distances,
we recommend the thicker 2 x 4 mm
response to customer demand, all our cables are
pre-wired for practical usage lengths between 10
and 50 metres.
Teufel speaker cable 2 x 4 mm
ensure that your audio signals are passed to
the speakers cleanly and without being com-
promised
Our cables are pre-wired for practical usage
lengths between 10 and 50 metres.
Teufel NF mono cinch cable
Ultra 2 loudspeaker
terference. A reliable connection is guaranteed
by sturdy, gold-plated connectors. This cable
is available in several different lengths (2.5 to
15 metres) to perfectly match your requirements.
Y adapter
®
Ultra 2 sur-
M 620 P speaker stand
2
2
is fastened with a packing screw), and the spea-
2
-cable. In
ker cable is hidden away inside the stand. A sturdy,
maple-coloured base plate ensures the stand's
stability. Height: 69 cm.
2
Hundreds of ultra-thin,
low-oxygen copper wires
(protected by a thick,
flexible,
transparent
plastic sleeve that with-
stands almost any stress)
by
under
dimensioned
This cable is designed for
connecting
active
woofers to AV receivers/
amplifiers, and it is shield-
ed against magnetic in-
1 x socket to 2 x connector.
A Y adapter lets you feed
a mono sub signal to both
of the subwoofer's stereo
inputs; this increases the
subwoofer's overall volume.
With a design based on two
sleek columns that seem
to make the speaker float
in mid-air, this new speaker
stand is perfectly matched
to Teufel's M 950 FCR loud-
speakers. The speaker is
securely fastened using
a proprietary mounting
mechanism (speaker base
cabling.
sub-
If you require any optional
accessories, you can easily
order these directly from the
Accessories section of our
online store:
www.teufel.eu
Teufel · System 9 THX
®
Ultra 2
7

Advertisement

Table of Contents
loading

Table of Contents