Connections - Teufel Motiv 6 Technical Specifications And Operating Manual

Connecting the speakers
to an AV surround
receiver (example:
5.1 setup).
A 6.1/7.1 AV receiver
additionally provides one
or two Rear Centre Outs.
Note:
The set's five passive speakers
– FCR satellite speakers and FR
column speakers – have identical
cabinets and components. The
column speakers simply feature
an integrated stand; however,
this does not affect the sound.
You can freely assign the
speakers as front, centre or
rear speakers, depending on the
layout of your room. However,
we strongly recommend placing
the speakers as matching pairs,
i.e., the two column speakers
TOGETHER as the front
or rear speakers.
12 · Motiv 6

Connections

You can connect the Motiv 6 system to any mod-
ern Dolby Digital/DTS 5.1/6.1/7.1 AV receiver for
a 5.1 setup with an active subwoofer. If your AV
receiver is 6.1/7.1, simply ignore the Rear Centre
Out(s). To make full use of a 6.1 AV receiver, you
will need to install an additional MO 6 C speaker
(see page 7).
If you already own a 7.1 AV receiver, you can ex-
pand your Motiv 6 system with two additional
FR column speakers or FCR satellite speakers to
create a full-blown 7.1 home theatre surround
system.
If you are using a 5.1 AV receiver, connect the
front, centre and rear speakers as shown in the
diagram. ĕ Fig. 1
Connect the subwoofer output (Sub Out) of your
Dolby Digital/DTS AV receiver to the right Line In-
put (R) of the subwoofer using a mono RCA cable.
ĕ Fig. 2
In this setup, the left input (Line Input L) is not
connected. If you want to feed the Sub Out signal
to both of the subwoofer's inputs, use a Y adapter
(see Accessories, p. 7).
Motiv 6
Front speaker
left
Subwoofer RCA line input
Motiv 6
Rear speaker
left
1. Front, centre and rear speakers
AV receiver
Speaker output
2. Subwoofer
RCA line output
Sub Out
AV receiver
Motiv 6
Centre speaker
Motiv 6
Subwoofer
Teufel
connection
panel
RCA line input
Input R
Input L
Subwoofer
Motiv 6
Front speaker
right
Motiv 6
Rear speaker
right