Audio Connections - Teufel Concept R 2 Technical Specifications And Operating Manual

Audio connections

You can connect the Concept R 2 to any modern
Dolby Digital/DTS 5.1/6.1/7.1 AV receiver for a 5.1
set-up with an active subwoofer. If your AV re-
ceiver is 6.1/7.1, simply ignore the Rear Centre
Out(s).
If your receiver is 5.1, connect the front, centre and
rear speakers as shown in the diagram.ĕ Fig . 1
Connect the subwoofer output (Sub Out) of your
Dolby Digital/DTS AV receiver to the right Line
Input (R) of the subwoofer using a mono RCA
cable.ĕ Fig . 2
In this set-up, the left input (Line Input L) is not
connected. If you want to feed the Sub Out signal
to both of the subwoofer's inputs, use a Y adapter
(see Accessories, p. 6).
Concept R 2
floorstanding speaker
R
Subwoofer RCA line input
Mono RCA cable
Concept R 2
floorstanding
speaker
1 . Front, centre and rear speakers
AV receiver
Speaker output
2 . Subwoofer
Concept R 2
centre speaker
Concept R 2
active
subwoofer
Speaker cable
Sub out + -
Centre
-
Front left
+
AV receiver
Rear left Rear right
- + - +
RCA line output RCA line input
Sub out
AV receiver
Concept R 2
floorstanding speaker
Front right
Concept R 2
floorstanding
Teufel
connection
panel
Input R
Input L
Subwoofer
Connecting the speakers
to an AV surround
receiver – example:
5.1 set-up
speaker
· Concept R 2 9