Connections In A 5.2 System - Teufel Theater 3 Hybrid Series Technical Specifications And Operating Manual

Connections in a 5.2 system

Connecting the integrated active subwoofers
For connection purposes, treat the M 320 F hybrid
boxes just like two separate active subwoofers. As
there are two subwoofers, you will need a Y adapter
(see page 7) to split your AV receiver's Sub Out into
two.
Using two separate mono RCA cables, connect the
Y adapter's outputs to the M 320 F boxes. Each of
the hybrid boxes has an RCA "Line In" for this pur-
pose. On the connection panel, there is also an input
source switch. Set this to "AV Receiver" to ensure
the correct filtering and phasing of the subwoofer
signal.
Connecting the satellite speakers
Connect the Theater 3 Hybrid speakers to any stan-
dard 5.1/6.1/7.1 AV receiver to set up a 5.2 surround
system. If your AV receiver is 6.1/7.1, simply ignore
the Rear Centre Out(s).
If you have a modern 7.1 AV receiver, you can expand
the Theater 3 Hybrid with an EX set consisting of
two additional M 320 R speakers(see page 7) to cre-
ate a full-blown 7.2 home theatre surround system.
If you are using a 5.1 AV receiver, connect the front,
centre and rear speakers as shown in the diagram. A
6.1/7.1 AV receiver additionally provides one or two
Rear Centre Outs.
Note:
With the expanded 7.2 speaker
set, connect the additional
L/R rear centre speakers to the
7.1 AV receiver's
L/R Rear Centre Outs.
Connecting the speakers
to an AV surround
receiver (example:
5.2 cinema system)
Teufel·Theater 3 Hybrid
11