Control Elements And Connections; Setup And Connection; Setup Location; Audio Input - Teufel RearStation Technical Description And Operating Instructions

Control elements and connections

Transmitter RearStation
Front side
(3) (4)
Pos Name Description
(3) –
Infrared receiver
(4)
Switch the device on or to
standby
(5) –
Power LED

Setup and connection

Setup location

• Select a stable, level base.
• Make sure that the environment is clean and free from
dust.
• Avoid placing the unit close to sources of heat or in
direct sunlight.
• Arrange the connector cables so that they do not pose
a trip hazard.
• Do not place any heavy objects on top of the cables or
the unit.
With the RearStation, you can send stereo audio signals
to two speakers via wireless link; this eliminates the
need for installing speaker cables. The system can cover
a distance of 20 metres, but that may be reduced by
objects (furniture) and walls.
The RearStation is therefore ideal for driving the back
speakers of a 5.1/7.1 home cinema system if the
AV receiver outputs the rear channels on RCA jacks (line
level). With some receiver models it may be necessary to
activate these line outputs in the settings.
If you don't find a line-out on your device, you need a
level converter, which you will find in our webshop. This
converts the high-level signal into a line signal.
Back side
(5)
Pos Name
(6)
(7)
(8)

Audio input

Connect the source device with analogue sound to the
"AUDIO IN" jacks (7). For this, you will need a dual RCA
cable (L and R).

Connecting to a power supply

• Connect the small plug of the mains adapter (2) with
the "POWER" jack (6) of the transmitter (1).
• Insert the mains adapter in a mains socket.
(6) (7)
Description
POWER
Connection for mains adapter (2)
AUDIO IN
Audio input jacks
AUTO ON
Switch for automatic activation/
deactivation
(6)
(2)
(8)
(7)
5
• RearStation