Table of Contents
Advertisement
2.COPY FUNCTIONS
4
Follow the instructions on the LCD screen to use the "2IN1/4IN1" function. You are
instructed to make the following settings.
ORIGINAL SIZE
Press
or
ORIGINAL ORIENTATION
Press
or
SET ORIGINAL
Place the originals as shown on the LCD screen. Make sure that you place the original in the same
orientation as the one selected in "ORIG. ORIENTATION".
NEXT ORIGINAL?
When you place the original on the original glass, this message appears. Press
"SCAN NEXT PAGE". Select "FINISHED" when you have finished scanning your originals.
The size of the original selected in [ORIGINAL SIZE] is disabled if it is detected automatically.
For the detectable original sizes, see the following page:
P.38 "Acceptable originals"
If the size of the original is not detected automatically, specify [ORIGINAL SIZE] and place the
original on the original glass.
"CANCEL JOB?" is displayed if there is no operation for a certain period.
to select the size of the original.
to select the portrait or landscape orientation of the original.
2 COPY FUNCTIONS
or
to select
Copy Settings
57
Advertisement
Table of Contents
