Table of Contents
Advertisement
5 SCAN FUNCTIONS
6
Press [START].
When you store scans in a USB storage device, never attempt to remove the device from the
equipment until data transmission is completed. Removing the USB storage device during data
transmission may corrupt the device.
7
If there are more originals, place the next ones.
When you place originals on the Reversing Automatic Document Feeder (RADF), select "SCAN
NEXT" using
When you place an original on the original glass, select "SCAN NEXT PAGE" using
press [OK].
CONTINUE SCAN
SCAN NEXT
FINISHED
Repeat step 7 until all the originals have finished being scanned.
8
If there are no more originals, select "FINISHED" using
by pressing the [OK].
If originals remain on the Reversing Automatic Document Feeder after pressing [FINISHED] on the
CONTINUE SCAN screen, remove all the originals. Leaving them may cause a paper jam.
158
Scan to USB Memory
or
and press [OK]. (Only when "CONTINUE SCAN" is set to "ON")
RADF
NEXT ORIGINAL?
SCAN NEXT PAGE
FINISHED
Original Glass
or . The originals are stored
or
and
Advertisement
Table of Contents
