Table of Contents
Advertisement
5.SCAN FUNCTIONS
4
Click [Pre-Scan] to preview the original.
If you are not satisfied with the preview image, change the scan settings and preview the image again.
5
Click [Scan] to scan the original.
While scanning, you can stop scanning by clicking [CANCEL].
When the authentication screen appears, enter the department code that is required to log in to this
equipment. For details, ask your administrator.
6
Save the scanned image in your application.
The saving command varies depending on the application. You usually execute the Save or Save as
command on the File menu. If necessary, modify the scanned image, using the various graphic
commands in your application.
5 SCAN FUNCTIONS
Scanning From Application
133
Advertisement
Table of Contents
