Table of Contents
Advertisement
6 VARIOUS FUNCTIONS
Network Menu List
You can set various network functions.
For instructions on how to display the NETWORK menu, see the following page:
P.179 "User Functions Menu List"
NETWORK
COMPLETE
NIC STATUS
ETHERNET
P.176 "NIC status"
P.176 "Setting the Ethernet speed"
P.177 "Setting the TCP/IP protocol"
P.178 "Setting the HTTP network service"
Once the network has been set up, exit from USER FUNCTIONS menu by pressing [CANCEL] or [USER
FUNCTIONS] button. When "APPLY AND REBOOT?" message appears, select "YES", and then press
[OK]. The equipment is automatically rebooted and the network settings are applied.
NIC status
You can confirm the current network communication status.
NIC STATUS
:
LINK CONNECTED
Setting the Ethernet speed
You can specify the Ethernet speed.
ETHERNET
AUTO
10MBPS HALF DUPLEX
10MBPS FULL DUPLEX
Item name
AUTO
10MBPS HALF DUPLEX
10MBPS FULL DUPLEX
100MBPS HALF DUPLEX
100MBPS FULL DUPLEX
If the network is not stable, turn the power of the equipment OFF and then back ON.
176
Network Menu List
Select the desired combination of communication speed and
transmission method.
Description
Advertisement
Table of Contents
