Table of Contents
Advertisement
1 PREPARATION
5
While pushing the green knob of the side guides, adjust the side guides at the position
of the desired paper size.
Adjust the side guides with both hands.
6
Load paper face up in the drawer.
Up to 550 sheets (80 g/m
paper does not exceed the line indicated inside of the guide.
P.20 "Acceptable paper types"
Fan the paper well before loading it in the drawer, otherwise multiple feeding could occur. Be
careful not to cut your fingers.
Place the paper face up. The printable side may be noted on its packaging.
Never put anything in a vacant space in the drawer after the paper has been loaded. Otherwise,
it may cause paper misfeeds or an equipment malfunction.
7
Adjust the side guides.
Be sure that a gap of approx. 0.5 mm (0.02") (1.0 mm (0.04") or less in total) is left between the paper
and each side guide (shown as "A" in the picture). If the gap is inappropriate, this could cause a paper
misfeed.
28
Preparation 2 - Loading Paper
2
or 20 lb. Bond) can be loaded. Be sure that the height of the stacked
A
Advertisement
Table of Contents
