General Information; Features; Description - Patton electronics Model 1058 User Manual

Thank you for your purchase of this Patton Electronics product. This
product has been thoroughly inspected and tested and is warranted for
one year for parts and labor. If any questions or problems arise during
installation or use of this product, contact Patton Electronics Technical
Support at +1 (301) 975-1007.

2.1 FEATURES

• Easy to install standalone VDSL modems—no configuration required
• Auto-sensing full or half-duplex Ethernet
• Auto-sensing 10/100Base-T
• Extends network connections up to 4,652 ft (1,418 m) over 2-wire 24-
AWG unconditioned lines
• 12.5 Mbps symmetric line rate; 10 Mbps data rate
• POTS/ISDN splitter on board
• Transparent operation
• LED indicators for Power, Ethernet Link & Activity, VDSL Link & Error
• Surge supression up to 20 kA (8120 µs)
• Available in rack-mount or standalone configurations
• Made in the USA

2.2 DESCRIPTION

The Patton Electronics Model 1058/CO* and 1058/CP VDSL* modems
provide high-speed LAN connections between peered Ethernet LANs,
remote PC's, or any other network enabled 10/100Base-T device.
Operating in pairs with a Model 1058/CO (central office) located at one
end of the LAN extension and a Model 1058/CP (customer premise) at the
other end, these units can automatically forward LAN broadcasts, multi-
casts, and frames across a 2-wire twisted pair link. The data is passed
transparently (that is, unmodified) through the 1058s. What's more, the
1058s automatically add and delete MAC addresses, only passing packets
across the VDSL link that are meant for the remote peered LAN.
* Only Models 1058DV/CO and 1058DV/CP have POTS/ISDN split-
ters on board.

2.0 GENERAL INFORMATION

5