General Information - Patton electronics IM2RC/F-128K User Manual

1.2 SERVICE
All warranty and non-warranty repairs must be returned freight pre-
paid and insured to Patton Electronics. All returns must have a Return
Materials Authorization number on the outside of the shipping contain-
er. This number may be obtained from Patton Electronics Technical
Services at:
Tel: (301) 975-1007
Email: support@patton.com
www: http://www.patton.com
NOTE:
Packages received without an RMA number will not be
accepted.
Patton Electronics' technical staff is also available to answer any
questions that might arise concerning the installation or use of your
Model IM2RC/F-128K. Technical Service hours: 8AM to 5PM EST,
Monday through Friday.
WARNING!
This device is not intended to be connected
to the public telephone line.
3

2.0 GENERAL INFORMATION

Thank you for your purchase of this Patton Electronics product.
This product has been thoroughly inspected and tested and is warrant-
ed for One Year parts and labor. If any questions arise during installa-
tion or use of this product, please contact Patton Electronics Technical
Support at: (301) 975-1007.
2.1 FEATURES
• Designed for use with Patton Electronics short range modem
access products that receive Patton's Rear Card modules and
support 128k synchronous data rates
• 120 ohm RJ-45 Network Termination
• Complies with ITU-T G.823 Jitter Control Specifications
• Supports Clear Channel
• Built-in Transformer Isolation and Surge Protection
• Supports Network or Modem Timing
• Fits in Patton's 2u (3.5") rack chassis and cluster boxes
• Made in the U.S.A.
2.2 DESCRIPTION
The Patton Model IM2RC/F-128K is a rack-mountable rear card
that allows Patton baseboard modems to connect to modified 128 kbps
G.703 devices. With the IM2RC/F-128K you can achieve high speed
G.703 network extension, dedicated high speed internet access,
remote LAN access,...the possibilities are endless! Supporting 128kbps
clear channel, the IM2RC/F-128K can set its own clock or it take clock-
ing from the G.703 network.
The Model IM2RC/F-128K meets baseband modem function cards
such as 1094ARC and 1095RC in the mid-plane of Patton's 2U (3.5")
rack chassis. G.703 access is accomplished via a 120 Ohm RJ-45
jack. The twisted pair line connections between the baseboard
modems (2-W or 4-W) are made with the second RJ-45 jack.
The Model IM2RC/F-128K features on-board transformer isolation
and surge protection as well as compliance with ITU-T G.823 Jitter
Control Specifications.
4