Help Commands
The following commands are provided to help the user find the
correct command:
• help: Lists all the commands that the console recognizes.
• system help: Lists all the commands that start with system that the
console recognizes.
• system set help: Lists all the commands that start with system set
that the console recognizes.
• system show help: Lists all the commands that start with system
show that the console recognizes.
• dsl help: Lists all the commands that start with dsl that the
console recognizes.
• dsl set help: Lists all the commands that start with dsl set that the
console recognizes.
• dsl show help: Lists all the commands that start with dsl show that
the console recognizes.
• dsl show errcntr help: Lists all the commands that start with dsl show
errcntr that the console recognizes.
System Configuration Commands
The following commands allow the user to configure the system:
• system set password <password>: Sets the system password.
• system set circuitid <circuitid>: Sets the circuit ID.
• system set timeslots <1–72>: Sets the number of DSL timeslots. The
data rate is calculated by 64K x timeslots.
20