Patton electronics 3088 User Manual page 9

The Model 3088 provides the following parameters for configuring
the unit.
Parameter
Password The password used to login
to the console.
Circuit ID The circuit ID used to identify
the unit.
Front Panel If the unit is populated with
Switches front panel switches, they can
be used to start and stop test
modes. If they are disabled,
however, the front panel
switch settings will be
ignored.
DTE Loops The V.35 interface can
request LALs and RDLs
using its RRDL and RLAL
pins. If DTE loops are dis-
abled, requests for loopbacks
on these pins will be ignored.
TX Clock The serial TX data can be
sampled on either the falling
edge (normal) or rising edge
(inverted) of the TX clock.
Timeslots The number of DSL timeslots.
This controls both the DSL and
the serial data rate. The data
rate is calculated by the equa-
tion: data rate = #timeslots x
64k
Description
9
Possible Default
Values
Character patton
strings 1–9
characters
long.
Character Patton
string 1–64 Model
characters 3088
long.
Enabled or Enabled
Disabled
Enabled or Enabled
Disabled
Normal or Normal
Inverted
1–72 4
Value