Table of Contents
Advertisement
Quick Links
Dear Valued Customer,
Thank you for purchasing Patton Electronics products! We do
appreciate your business. I trust that you find this user manual helpful.
We manufacture one of the widest selections of data communications
products in the world including CSU/DSU's, network termination units,
powered and self-powered short range modems, fiber optic modems, interface
converters, baluns, electronic data switches, data-line surge protectors,
multiplexers, transceivers, hubs, print servers and much more. We produce
these products at our Gaithersburg, MD, USA, facility, and can custom
manufacture products for your unique needs.
We would like to hear from you. Please contact us in any of the
following ways to tell us how you like this product and how we can meet your
product needs today and in the future.
Web:
http://www.patton.com
Sales E-mail:
sales@patton.com
Support E-mail:
support@patton.com
Phone - Sales
(301) 975-1000
Phone - Support
(301) 975-1007
Fax:
(301) 869-9293
Mail:
Patton Electronics Company
7622 Rickenbacker Drive
Gaithersburg, MD 20879 USA
We are committed to a quality product at a quality price. Patton
Electronics is BABT and ISO 9001 certified. We meet and exceed the highest
standards in the industry (CE, UL, etc.).
It is our business to serve you. If you are not satisfied with any
aspect of this product or the service provided from Patton Electronics or its
distributors, please let us know.
Thank you.
Burton A.Patton
Vice President
P.S. Please tell us where you purchased this product:
_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
USER
MANUAL
MODEL 1000 and 1000S
Ultra Miniature Asynchronous
Short Range Modems
Part #07M1000-C
Doc. #023021UC
Revised 7/29/97
C E R T I F I E D
An ISO-9001
Certified Company
SALES OFFICE
(301) 975-1000
TECHNICAL SUPPORT
(301) 975-1007
http://www.patton.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Patton electronics 1000
Summary of Contents for Patton electronics 1000
-
Page 1: User Manual
P.S. Please tell us where you purchased this product: _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ USER MANUAL MODEL 1000 and 1000S Ultra Miniature Asynchronous Short Range Modems Part #07M1000-C SALES OFFICE Doc. #023021UC (301) 975-1000 Revised 7/29/97 TECHNICAL SUPPORT C E R T I F I E D... - Page 2 However, there is no guarantee that interference will not occur in a particular installation. If the Model 1000 does cause interference to radio or television reception, which can be...
- Page 3 For your convenience, the Model 1000 has an externally accessible DCE/DTE switch (see diagram below). If the device connected to the Model 1000 is a modem or multiplexer (or is wired like one), set the switch to "DTE". This setting causes the Model 1000 to behave like Data Terminal Equipment and transmit data on pin 2.
- Page 4 4.1.2 TWISTED PAIR CONNECTION USING TERMINAL BLOCKS If your RS-232 application requires you to connect two pairs of bare wires to the Model 1000, you will need to open the case to access the terminal blocks. The following instructions will tell you how to open the case, connect the bare wires to the terminal blocks, and fasten the strain relief collar in place so that the wires won't pull loose.
- Page 5 "G" on the terminal block. To avoid ground loops, we recommend connecting the shield at one end only. A ground wire is not necessary for proper operation of the Model 1000. 7. When you finish connecting the wires to the terminal block, the...
- Page 6 DB-25 port of the RS-232 device. After doing so, remember to insert and tighten the two captive connector screws. (Note: If you must use a cable to connect the Model 1000 to the RS-232, make sure it is a straight through cable of the shortest possible length—we recommend 6 feet or less).
- Page 7 1,200 17.0(27.2) 11.8(18.9) 8.0(12.8) APPENDIX B PATTON MODEL 1000 CABLE RECOMMENDATIONS The Patton Model 1000 operates at frequencies of 20kHz or less and has been performance tested by Patton technicians using twisted- pair cable with the following characteristics: Wire Gauge Capacitance 19 AWG/.9mm...
- Page 8 4- (RTS) Request to Send 5- (CTS) Clear to Send 6- (DSR) Data Set Ready 7- (SG) Signal Ground From Model 1000 Data Term. Ready (DTR) - 20 8- (DCD) Data Carrier Detect PATTON MODEL 1000 BLOCK DIAGRAM DIRECTION To Model 1000...
Need help?
Do you have a question about the 1000 and is the answer not in the manual?
Questions and answers