Mounting Instructions - DEVI devireg 530 Installation Manual

▪ The installation of the thermostat must be done by an
authorized and qualified installer according to local
regulations.
▪ The thermostat must be connected to a power supply
via an all-pole disconnection switch.
▪ The sensor is to be considered as live voltage. Have
this in mind if the sensor must be extended.
▪ Always connect the thermostat to continuous power
supply.
▪ Do not expose the thermostat to moisture, water, dust,
and excessive heat.
2

Mounting Instructions

6
Place the thermostat at a suitable height
on the wall (typically 80-170cm.).
In wet rooms, place the thermostat accord-
ing to local regulation on IP classes.
DEVIreg™ 530
Installation Guide