Bluetooth Device - Mitsubishi i-MiEV 2011 Owner's Manual

Features and controls
6. When all enrollment commands have been read out, the
voice guide will say "Speaker enrollment is complete."
The system will then end the speaker enrollment process
and return to the main menu.
NOTE
Completing the speaker enrollment process will turn on
the voice model automatically.
The commands "Help" and "Cancel" will not work in this
mode.
Enabling and disabling the voice model and retraining
You can turn a voice model registered with the speaker
3
enrollment function on and off whenever you want.
You can also retrain the system.
Use the following procedure to perform these actions.
1. Press the SPEECH button.
2. Say "Voice training."
3. If you have completed a speaker enrollment process once
already, the voice guide will say either "Enrollment is
enabled. Would you like to disable or retrain?" or "Enroll-
ment is disabled. Would you like to enable or retrain?"
4. When enrollment is "enabled," the voice model is on;
when enrollment is "disabled," the voice model is off. Say
the command that fits your needs.
Say "Retrain" to start the speaker enrollment process and
recreate a new voice model. (Refer to "Speaker
enrollment" on page 3-97.）
3-98
Connecting the Bluetooth
®
Bluetooth device
Before you can make or receive hands-free calls or play music
using the Bluetooth
®
Bluetooth device and Bluetooth
NOTE
Pairing is required only when the device is used for the
first time. Once the device has been paired with the
®
Bluetooth
N00564900013
device into the vehicle next time and the device will con-
nect to the Bluetooth
ported by the device).
Up to 7 Bluetooth
2.0 interface.
If multiple paired Bluetooth
cle, the cellular phone or music player most recently connected
is automatically connected to the Bluetooth
You can also change a Bluetooth
NOTE
Please go to following website for a lot of compatible
devices.
www.mitsubishifuse.com
Or contact Mitsubishi hands-free customer support at
(888)702-4100.
®
2.0 interface and
®
2.0 interface function, you must pair the
®
2.0 interface.
2.0 interface, all you need is to bring the
®
2.0 interface automatically (if sup-
®
devices can be paired with the Bluetooth
®
devices are available in the vehi-
®
2.0 interface.
®
device to be connected.
N00565000079
®