Mitsubishi i-MiEV 2011 Owner's Manual page 118

Using the LATCH system
1. In order to securely fasten the tether strap, remove the
head restraint from the location where you wish to install
the child restraint system.
2. Open the gap a little between the seat cushion (A) and the
seatback (B) with your hand to locate the lower anchor-
ages (C).
3. Push the anchor connectors (D) on the child restraint sys-
tem into the lower anchors (C) in accordance with the
instructions provided by the child restraint system manu-
facturer. Remember, the lower anchors provided with your
vehicle are designed to secure suitable child restraint sys-
tems compatible with the LATCH system in the outboard
positions of the rear seat only.
N00419100229
A- Vehicle seat cushion
B- Vehicle seatback
Seat and restraint systems
C- Lower anchor
D- Connector
2-29
2