Mitsubishi i-MiEV 2011 Owner's Manual page 249

Features and controls
7. The voice guide will say "Start pairing procedure on the
device. See the device manual for instructions." Enter in
®
the Bluetooth device the 4-digit number you have
registered in Step 6.
NOTE
Depending on the device, it might take a few minute to
®
pair the Bluetooth
face.
®
If the Bluetooth
®
Bluetooth device, the voice guide will say "Pairing has
timed out" and the pairing process will be cancelled.
3
Confirm that the device you are pairing supports
®
Bluetooth , and try pairing it again.
If you enter the wrong number, the voice guide will say
"Pairing failed" and the pairing process will be cancelled.
Confirm the number is right, and try pairing it again.
8. The voice guide will say "Please say the name of the
device after the beep." You can assign a desired name for
®
the Bluetooth device and register it as a device tag. Say
the name you want to register after the beep.
NOTE
When the confirmation function is on, after repeating the
device tag you have said, the voice guide will ask "Is this
correct?" Answer "Yes."
To change the device tag, answer "No" and then say the
device tag again.
9. The voice guide will say "Pairing complete," after which
a beep will be played and the pairing process will end.
3-100
®
device with the Bluetooth 2.0 inter-
2.0 interface cannot recognize the
Selecting a device
®
If multiple paired Bluetooth
cle, the cellular phone or music player most recently connected
is automatically connected to the Bluetooth
You can connect to the other cellular phone or music player by
following setting change procedures.
To select a cellular phone
1. Press the SPEECH button.
2. Say "Setup."
3. Say "Select phone."
4. After the voice guide says "Please say," the numbers of
the cellular phones and device tags of corresponding cel-
lular phones will be read out in order, starting with the cel-
lular phone that has been most recently connected.
Say the number of the cellular phone that you want to con-
nect to.
When the confirmation function is on, the system will ask
you again whether the phone that you want to connect to
is correct. Answer "Yes" to continue and connect to the
cellular phone.
Answer "No," and the voice guide will say "Please say."
Say the number of the phone that you want to connect to.
NOTE
You can connect to a phone at any time by pressing the
SPEECH button and saying the number, even before all of
the paired numbers and device tags of corresponding cel-
lular phones are read out by the system.
N00565100012
devices are available in the vehi-
®
2.0 interface.