Mitsubishi i-MiEV 2011 Owner's Manual page 50

CAUTION
!
Be sure to insert the quick charge connector straight
into the quick charge port all the way to the base.
Failure to do so may result in the main drive lith-
ium-ion battery not charging or cause damage to the
charging equipment.
Do not leave the inner lid open for any significant
period of time without the charge connector
inserted. Foreign material, if allowed to enter the
port, can damage the port and/or prevent charging.
NOTE
There is a hole on the charge port for water drainage. If
this hole is blocked and water gets trapped in the charge
port, do not charge. Contact a certified i-MiEV dealer.
If the charge port becomes frozen, use a hair dryer to
defrost and dry it before charging. Forcing the charging
connector into the charging port while it is frozen can
damage the port, and it may prevent charging.
6. Insert the quick charge connector completely into the
quick charge port to begin charging.
For connecting and disconnecting, follow the instruction
manual for each quick charger.
WARNING
!
Be sure to insert the charge connector completely
into the charge port.
If the charge connector is only partially inserted and
the connector latch is not locked, the electric motor
switch could be turned to the "START" position and
the vehicle could start moving
General information/Charging
1-35
1