Mitsubishi i-MiEV 2011 Owner's Manual page 304

"AUTO" position
The vents change to the following positions according to the
position of the temperature control dial.
Refer to "Temperature control dial" on page 5-8.
Temperature control dial position
Between "C" and middle( )
Set the dial to middle
( ) from the "C" side
Middle( )
Set the dial to middle
( ) from the "H" side
Near middle ( )
Between
middle ( )
Near "H"
and "H"
CAUTION
!
When using the mode selection dial between the
" " and " " positions, prevent fogging by press-
ing the air selection switch to select outside air.
(Refer to "Air selection switch" on page 5-9.)
Air selection switch
Normally, use the outside air position to keep the windshield
and side windows clear and to quickly remove fog or frost
from the windshield.
Vents
To change the air selection, simply press the air selection
switch.
: Upper part of front
passenger compartment
: Upper part of front
passenger compartment
: Leg area
: Leg area
: Leg area,
windshield, and door
windows
Outside air {Indicator light (A) OFF}
Outside air is introduced into the passenger compartment.
Recirculated air {Indicator light (A) ON}
Air is recirculated inside the passenger compartment.
Comfort controls
N00736800400
5
5-9