To Play Tracks From A Bluetooth Device; Bluetooth ® 2.0 Interface - Mitsubishi ASX Manual

For pleasant driving
To play USB memory device tracks
via voice operation (vehicles with Blue-
®
tooth 2.0 interface)
Desired tracks can be selected and played from
your USB memory device by "Artist", "Album",
"Playlist" and "Genre" using voice commands.
For information concerning the voice recognition
function or speaker registration function, refer to
®
"Bluetooth 2.0 interface" on page 5-41.
The playback sequence of tracks is the same as
when an iPod is connected. Refer to "To play iPod
tracks via voice operation" on page 5-24.
Preparation for voice operation
To use the voice operation, press the SPEECH but-
ton (1) first.
5
5-30
To play tracks from a Bluetooth
device (vehicles with Bluetooth
2.0 interface)
E00759400055
You can wirelessly connect a digital audio player
or cellular phone supporting Bluetooth
the tracks on the connected device.
®
Refer to "Bluetooth 2.0 interface" on page 5-41
for the connecting method, etc.
The following explains the basic playback method.
NOTE
l This function may not be available depend-
ing on the connected device.
® ®
Bluetooth device control panel and
display
®
E00759700016
®
to listen to
1- CD (Mode change) button
2- PWR (On-Off) button
3- DISP (Title display) button
4- PAGE (Title scroll) button
5- RPT (Repeat) button
6- RDM (Random) button
7- B (Bluetooth ®
) indicator
8- TRACK indicator
9- RPT/RDM/SCAN indicator
10- DISC DOWN (Pause/Stop) button
11- DISC UP (Play) button
12- SCAN button
13- TRACK (Track up/down) button
To listen to tracks from a device con-
nected via Bluetooth
1. Press the PWR button to turn on the audio sys-
tem. The system turns on in the last mode used.
2. Press the CD button several times to switch
®
to the B (Bluetooth
E00762600077
®
E00762700081
) mode. The input mode