Mitsubishi i-MiEV 2011 Owner's Manual page 248

To pair
®
To pair a Bluetooth device with the Bluetooth
follow the steps below.
NOTE
For assistance with pairing, please go to the following
website.
www.mitsubishifuse.com
1. Stop your vehicle in a safe area, put the selector lever in
the "P" (PARK) position, and then pull the parking brake
lever.
NOTE
You cannot pair any Bluetooth
®
Bluetooth 2.0 interface unless the vehicle is parked.
Before paring a Bluetooth
2.0 interface, confirm that the vehicle is parked in a safe
location.
2. Press the SPEECH button.
3. Say "Setup."
4. Say "Pairing Options."
5. The voice guide will say "Select one of the following:
pair, edit, delete, or list." Say "Pair."
NOTE
If 7 devices have already been paired, the voice guide will
say "Maximum devices paired" and then the system will
end the pairing process. To register a new device, delete
one device and then repeat the pairing process.
(Refer to "Deleting a device" on page 3-100.)
®
2.0 interface,
®
device with the
®
device with the Bluetooth
6. The voice guide will say "Please say a 4-digit pairing
code." Say a 4-digit number.
When the confirmation function is on, the system will
confirm whether the number said is acceptable. Answer
"Yes."
Answer "No" to return to pairing code selection.
NOTE
®
Some Bluetooth
Please refer to the device manual for pairing code require-
ments.
The pairing code entered here is only used for the
®
Bluetooth connection certification. It is any 4-digit num-
ber the user would like to select.
Remember the pairing code as it needs to be keyed into
®
the Bluetooth device later in the pairing process.
®
Depending on the connection settings of the Bluetooth
device, this code may have to be entered each time you
connect the Bluetooth
interface. For the default connection settings, refer to the
instructions for the device.
Features and controls
devices require a specific pairing code.
®
device to the Bluetooth
3
®
®
2.0
3-99