Mitsubishi i-MiEV 2011 Owner's Manual page 348

3. Remove the screws (A), and remove the cover (B).
4. Remove the tire repair kit.
To store
1. Return the tire repair kit to its original place.
Attach the cover and fasten the screws.
2. Insert two wire tabs at the rear edge of the seat cushion
under the seat back.
3. Pass both rear seat belt buckles through slits at the rear
edge of the seat cushion. Make sure that the seat belt
buckles are not twisted.
4. While pushing the seat cushion as far back as possible,
press down hooks (A) under the seat cushion into the right
and left stopper installation holes (B) until a click is heard.
5. After installing the seat cushion, shake it lightly to con-
firm that it is properly fixed in position.
For emergencies
N00837900018
6
6-9