Mitsubishi i-MiEV 2011 Owner's Manual page 255

Features and controls
6. The voice guide will say "Calling <name> <location>"
and then the system will dial the telephone number.
NOTE
When the confirmation function is on, the system will
check if the name and location of the receiver are correct.
If the name is correct, answer "Yes."
To change the name or location to call, answer "No." The
system will return to Step 3.
Redialing
You can redial the last number called, based on the history of
dialed calls in the paired cellular phone.
Use the following procedure to redial.
3
1. Press the SPEECH button.
2. Say "Redial."
Send function
During a call, press the SPEECH button to enter voice recogni-
tion mode, then say "<numbers> SEND" to generate DTMF
tones.
For example, if during a call you need to simulate the pressing
of a phone button as a response to an automated system, press
the SPEECH button and speak "1 2 3 4 pound send" and the
1234# will be sent via your cellular phone.
3-106
Receiving calls
If an incoming phone call is received while the electric motor
switch is in the "ACC" or "ON" position, the audio system will
be automatically turned on and switched to the incoming call,
even when the audio system was originally off.
The voice guide announcement for the incoming call will be
output from the front passenger's seat speaker.
If the CD player or radio was playing when the incoming call
was received, the audio system will mute the sound from the
CD player or radio and output only the incoming call.
To receive the call, press the PICK-UP button on the steering
wheel control switch.
When the call is over, the audio system will return to its previ-
ous state.
N00565700018
N00565800022