Table of Contents
Advertisement
This chapter describes the operation and installation of the software
drivers supplied on the Display Driver Diskettes that are shipped
with your VGA adapter.
Your VGA adapter is based on the CHIPS VGA Flat Panel/CRT
controller and is fully IBM VGA compatible. This controller offers a
large set of extended functions and higher resolutions. If you intend
to use your VGA adapter in standard VGA mode only, you do not need
to install any of these drivers. Since your VGA adapter is fully
compatible, it does not require any special drivers to operate in
standard modes.
The purpose of the enclosed software drivers is to take advantage of
the extended features of the CHIPS VGA Flat Panel/CRT controller.
Some of the high-resolution drivers provided in this package will work
only in certain system configurations. If a driver does not display
correctly, try the following:
1. Change the display controller to CRT-only mode, rather than flat
panel or simultaneous display mode. Some high-resolution drivers
will display correctly only in CRT mode.
2. If a high-resolution mode is not supported on your system, try
using a lower-resolution mode. For example, 1024 x 768 mode will
not work on some systems, but 800 x 600 mode is supported on
most.
8 2
PCM-5894/5892 User Manual
Advertisement
Table of Contents
