Table of Contents
Advertisement
7. Place the Supporting CD-ROM into your CD-ROM drive.
8. When the Install from Disk dialog box appears, type the directory
storing the drivers and click "OK."
The WIN NT 4.0 directory is located in "cd-rom: \CD-ROM\PCM-
5892\driver\vga driver\dos nt\winnt40".
"cd-rom:" : the drive letter of you CD-ROM drive
9. When the Change Display dialog box appears, click "OK."
10. When the Third-party Drivers dialog box appears, click "Yes."
A message will appear stating that the drivers were successfully
installed, click "OK." You must now restart Windows NT 4.0.
1. Click on the "Start" button and select "Control Panel" from the
Settings group.
2. Double-click on the Display icon.
3. Select Settings tab in the Display Properties window.
4. In the Color Palette area, change between 16, 256, 32768, 65536,
and 16777216 colors.
5. To select a new desktop resolution size, go to the Desktop Area
and use the slider to change resolution from 640 x 480, 800 x 600,
1024 x 768, to 1280 x 1024.
6. Select "Test" to test the resolution. If the display test screen was
good then select "Yes" when the Testing Mode dialog box appears.
If the display test screen was bad then select "No." Windows NT
4.0 will give you an error message.
7. Click "OK." If the display test screen was good and you selected
"Yes", Windows NT 4.0 will change the mode without restarting.
Chapter 4 Driver Installation
97
Advertisement
Table of Contents
