Table of Contents
Advertisement
The mainboard onboard Ethernet interface supports all major network
operating systems. I/O addresses and interrupts are easily configured
via the BIOS Setup. To configure the medium type, to view the current
configuration, or to run diagnostics, do the following:
1. Power the mainboard on. Ensure that the RSET8139.EXE file is
located in the working drive.
2. At the prompt type RSET8139.EXE and press <Enter>. The
Ethernet configuration program will then be displayed.
3. This simple screen shows all the available options for the Ether-
net interface. Just highlight the option you wish to change by
using the Up and Down keys. To change a selected item, press
<Enter>, and a screen will appear with the available options.
Highlight your option and press <Enter>. Each highlighted option
has a helpful message guide displayed at the bottom of the screen
for additional information.
4. After you have made your selections and you are sure that this is
the configuration you want, press ESC. A prompt will appear
asking if you want to save the configuration. Press Y if you want
to save.
The Ethernet Setup Menu also offers three very useful diagnostic
functions. These are:
1. Run EEPROM test
2. Run Diagnostics on Board
3. Run Diagnostics on Network
Each option has its own display screen which shows the format and
result of any diagnostic tests undertaken.
100
PCM-5894/5892 User Manual
Advertisement
Table of Contents
