Advertisement
Install the Celerra Startup Assistant (CSA)
Before installing the CSA, verify the following requirements:
•
Access to the Powerlink website (preferred) or the Celerra Network Server Applications and Tools CD
is available.
•
Windows-based client computer is on the same subnet (customer network) as the
Celerra Management Control Station.
•
The computer must have at least 100 MB of free space. Internet connectivity is recommended.
To obtain and install the CSA, perform the following numbered steps:
Note: On your computer, disable any fi rewall software, pop-up blockers, virtual private network
(VPN) interfaces, and VMware
1. Download the CSA from a link on the Celerra Tools page of the Powerlink website. If you do not
have access to the Powerlink website, insert the Celerra Network Server Applications and Tools
CD into your computer.
2. In the EMC Product Installation window, click Celerra Startup Assistant to install the CSA on
your computer.
Network
Load the Apps & Tools CD in
either a laptop or PC tower.
For more information, refer to Celerra Tools on http://Powerlink.EMC.com
Celerra Startup Assistant
®
network interfaces before running the CSA.
33
CNS-001426
Advertisement
