Advertisement
Celerra Startup Assistant worksheet
Verify that the site is properly prepared for your Celerra System. Complete the worksheet and
use the information to verify the values when you run the Celerra Startup Assistant (CSA).
Note: The CSA pre-populates values based on auto-discovery from your Windows client.
Shaded areas are values that will be auto-discovered based on your system and network
environment; if auto-discovery fails, you need to provide the information manually.
1. Record the external network settings for the Control Station.
Control Station hostname
Control Station static IP address
Netmask
Gateway
DNS domain
Primary DNS server
Secondary DNS server
NTP server
TimeZone
2. The passwords for the root user/system backend administrator and NAS administrator
are default values. These default values should be changed as soon as possible for
security reasons.
root_password (default value = nasadmin)
NAS administrator (default value = nasadmin)
3. The appropriate blade external network settings are auto-discovered.
Blade DNS domain
Blade primary DNS server
Blade secondary DNS server
Blade NTP server
For more information, refer to Celerra Tools on http://Powerlink.EMC.com
31
Advertisement
