Advertisement
Cabling MPFS hosts over Fibre Channel
Note: If your Celerra does not use MPFS, proceed to page 28.
If you have Fibre Channel ports available for host attach, you have the option of confi guring Multi-Path File
System (MPFS) on your Celerra. This confi guration supports connecting directly to the MPFS clients, or
connecting to the MPFS clients through a switch.
To connect directly to MPFS clients, connect each client to the corresponding Fibre Channel ports on
the I/O modules in slots A2 and B2. For example, a client connected to port 0 in slot B2, should also be
connected to port 0 on slot A2.
Clients
Storage processor
10/100/1000
10/100/1000
B0
B1
B2
B3
B4
A0
A1
A2
A3
A4
MGMT B
MGMT A
CNS-001449
For more information, refer to Celerra Tools on http://Powerlink.EMC.com
25
Advertisement
