Pairing Fingerprint Reader - Mul-t-lock ENTR User Manual

6.4 Pairing Fingerprint Reader

This procedure is done via the ENTR® lock.
See also: Pairing Touchpad Reader.
1
Touch ENTR® lock screen with palm
or fingers for 3 seconds to active.
4
Press [1] to add the Reader.
Illuminated buttons turn off,
[OK] indication blinks for 15
seconds waiting for the reader.
[OK] indication blinks once.
2 short beeps emitted.
Fingerprint Reader added.
Note: At the end of the initial pairing process,
a short notice will be displayed.
28
2
Press [Add]
5
Touch Fingerprint Reader screen.
2 short beeps emitted,
Press [OK] for YES or [
PAIR LOCK?
*-NO OK-YES
Pairing OK
LOCK
PAIR
3
Numeric buttons illuminated.
Type [PIN Code]
Numeric buttons blinking.
] to cancel.
*
Pairing failed
1 long beep emitted.
Red LED illuminated for 2 seconds.
FAILED
PAIR
NO USERS
[#]
ENTR® User Manual